System information

Configuring Authentication
214 AlterPath OnBoard Administrator’s Guide
vi. Click “Save and apply changes.”
3. Make sure that timezone and time and date settings are synchronized
between the OnBoard and on the Kerberos server.
Note: Kerberos authentication depends on time synchronization. Time and
date synchronization is most easily achieved by setting both the OnBoard and
the Kerberos server to use the same NTP server.
a. Follow the procedure under “To Configure System Date and Time”
on page 184 to set the timezone, date, and time.
b. Work with the authentication server’s administrator to synchronize
the time and date between the OnBoard and the server.
4. Go to Config → Authentication and select Kerberos from the
“Authentication Type” pull-down menu.
The Kerberos configuration fields display.
5. Enter the IP address of the Kerberos server in the “Kerberos Server IP
address” field.
6. Enter the domain name of the Kerberos realm in the “Kerberos Realm
Domain Name” field.
7. Click “Save and apply changes.”