System information
Web Manager "Config" Menu Options 205
Configuring Users and Groups
T To Create and Authorize a User for Device
Management
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager for the Administrative User” on page
108, if needed.
2. Go to Config → Users and groups.
3. To add a user, do the following steps.
a. Click the “Add new user” button.
b. Enter a username in the “User Name” field.
c. Enter an identifying name and optional job description in the “Full
Name” field.
d. Select one of the radio buttons to choose a “User Type:”
e. Enter a password in the “Password” field and re-enter it in the
“Retype password” field.
f. Select an option from the “PPP/PPTP access” pull-down menu:
g. If you select any option except “None” from the “PPP/PPTP access”
pull-down menu, enter a password in the “PPP/PPTP password” field
and re-enter it in the “Retype password” field.
4. Assign device access to a user by performing the following steps.
a. Click the “Device Access” button.
b. Click the “Add new device” button.
The “Adding access to a new device for username” screen appears.
c. Select the device from the “New device” pull-down menu.
d. Check the checkbox next to each device management action for
which you wish to authorize the user to be able to perform on the
selected device.
e. Click OK.
The “Edit username’s device access privileges” screen appears.
5. Click OK.