System information

Configuring System Date and Time
184 AlterPath OnBoard Administrator’s Guide
Figure 6-36:Settings → Date/time Screen: Timezone Pull-down
When Enable is selected from the “Network Time Protocol” pull-down menu,
the “NTP server IP” field appears. An administrative user needs to specify the
IP address of an NTP server in the NTP server field, as shown in Figure 6-37.
Figure 6-37:Settings → Date/time Screen With NTP Fields
T To Configure System Date and Time
1. Select a timezone from the “Timezone” pull-down menu.
2. To enable the OnBoard to get its time from an NTP server, do the
following steps.
a. Select “Enable” from the Network Time Protocol pull-down menu.
b. Enter the IP address of the NTP server in the “NTP server IP” field.
3. To manually define the date and time, do the following steps.