System information

Configuring PCMCIA Cards
172 AlterPath OnBoard Administrator’s Guide
Configuring a PCMCIA Card
The following procedure describes the configuration steps to begin
configuring any PCMCIA card and includes links to procedures for
configuring specific types of cards.
T To Begin Configuring a PCMCIA Card
1. Log into the Web Manager as an administrative user.
2. Go to Settings → PCMCIA.
The PCMCIA screen appears.
3. Click the “Insert” button on the line for the slot in which you are installing
the PCMCIA card.
4. Insert a PCMCIA card into one of the slots on the front of the OnBoard.
See the “Advanced Procedures” chapter in the AlterPath OnBoard
Installation Guide for guidance about the order of insertion and other
hardware-specific instructions, if needed.
5. Click OK.
The card type appears under the “Card Type” column.
6. Click the “Configure” button.
The “PCMCIA card configuration” dialog box for the selected slot
appears.
7. Select the desired PCMCIA card type to configure from the pull-down
menu.
The “PCMCIA card configuration” dialog appears.
8. Go to the appropriate section listed in the following table for background
information, if needed, or go directly to the related procedure.
Configuring a Modem or GSM PCMCIA Card
Page 173
To Configure a Modem or GSM PCMCIA Card
Page 176
Configuring an Ethernet LAN PCMCIA Card Page 177