System information

Configuring PCMCIA Cards
170 AlterPath OnBoard Administrator’s Guide
See the AlterPath OnBoard Installation Guide for a list of supported cards.
Also check the release notes at the Cyclades website for additions to the list of
supported cards.
As shown in Figure 6-20, three buttons appear under the Action column in the
PCMCIA table. The following table shows how the buttons are used and
provides links to related procedures.
Inserting a PCMCIA Card
Clicking an “Insert” button on an entry for a PCMCIA card slot brings up a
dialog like the one shown in the following figure.
Figure 6-21:Insert PCMCIA Query
After the card is inserted, clicking “YES” in the dialog causes information to
appear in the “Card Type” column, as shown in the following figure.
Table 6-3: PCMCIA Action Buttons
Action Notes Where Described
Insert Click this button before
physically inserting the card.
“Inserting a PCMCIA Card” on page 170
Eject Click this button before
physically ejecting the card.
“Ejecting a PCMCIA Card” on page 171
Configure Click this button to bring up a
dialog for configuring the card
according to its type
“Configuring a PCMCIA Card” on page
172