System information

Configuring IPDU Power Management
166 AlterPath OnBoard Administrator’s Guide
After a user is added and the OK button is clicked, the user’s name is added to
the list on the Users Manager form along with the numbers of the outlets the
user is authorized to manage, as shown in the following figure.
Figure 6-16:Settings → IPDU → Users With a User Added
T To Configure a User to Manage Power
Outlets on a Connected IPDU
This procedure assumes the following prerequisites:
• An AlterPath PM IPDU is connected to the AUX port of the OnBoard.
• The AUX port is configured for power management (as described in “To
Configure an AUX Port for IPDU Power Management” on page 156).
• The user account has been defined under “To Create and Authorize a User
for Device Management” on page 205.
1. Log into the Web Manager as an administrative user.
2. Go to Settings → IPDU → Users.
3. Click the “Add User” button.
4. Enter the name of a user in the “Username” field.
5. Enter the outlets to manage in the “Outlets” field.
6. Click OK.
7. Click “Save and apply changes.”