System information

Configuring IPDU Power Management
162 AlterPath OnBoard Administrator’s Guide
The following table lists the tabs on the Settings → IPDU screen with links to
the sections where they are described.
Configuring Over Current Protection for an IPDU
The Settings” → IPDU → General tab displays a warning and three options
with checkboxes, as shown in the following screen example
Figure 6-11:Settings IPDU General Screen
The settings on the page shown in Figure 6-9 apply to all AlterPath PM
IPDUs that are either directly-connected or daisy-chained to the AUX port:
• “Checking “Enable Over Current Protection” allows an administrative
user to specify a maximum number of Amps. When the maximum
number of Amps is exceeded (and, therefore, an “overcurrent” state
Table 6-2: Options Under Settings → IPDU
Option Where Described
General “Configuring Over Current Protection for an IPDU” on page 162.
Users “Configuring Users to Manage Power Outlets on a Connected IPDU” on page
164.
Outlets “Configuring Names and Power Up Intervals for Outlets on a Connected IPDU”
on page 167