System information

Configuring the AUX Port for Modem Access or for Power Management
160 AlterPath OnBoard Administrator’s Guide
4. Choose “Login,” “Autodetect,” “PPP,” or “OTP” from the “Modem
access” menu.
5. Select a baud rate from the “Baud Rate” pull-down menu.
6. If you chose either “Login” or “Autodetect,” select an option from the
“Flow Control” menu.
7. Enter a modem chat string in the “Modem Initialization” field.
8. If you chose PPP or Autodetect, do the following:
a. Enter a local IP address or accept the default provided in the “Local
IP address” field.
b. Enter a remote IP address or accept the default provided in the
“Remote IP address” field.
c. Enable or disable authentication by checking or leaving unchecked
the “Authenticating Required” checkbox.
d. Accept or change the value in the MTU field.
e. Accept or change the value in the MRU field.
f. Accept or change PPP options as desired in the “PPP Options” field.
9. Enable callback, if desired, by doing the following steps.
a. Check the “Use Callback” checkbox.
b. Enter a callback phone number in the “Callback Number” field.
10. Click “Save and apply changes.”