System information

Web Manager "Settings" Menu Options 159
Configuring the AUX Port for Modem Access or for Power Management
Figure 6-7: Settings → AUX Port → Modem → Login
If “OTP” is selected from the “Access Type” pull-down menu, the fields, the
menu, and the checkbox shown in the following figure appear.
Figure 6-8: Settings → AUX Port → Modem → OTP
T To Configure an AUX Port for Modem Access
This procedure assumes that an external modem is connected to the AUX port
of the OnBoard. The values to select or to enter for modem configuration are
described in Table 1-20 on page 38.
1. Log into the Web Manager as an administrative user.
2. Go to Settings → AUX Port.
3. Make sure the “Modem” option is selected from the “Profile” menu.