System information

Upgrading AlterPath PM IPDU Software
150 AlterPath OnBoard Administrator’s Guide
As shown in the previous screen example, the directory contains a binary
file (PM_version_number.BIN) for the latest software version, a
checksum file (PM_version_number.md5sum), and a doc directory,
which contains PDFs of the latest AlterPath PM documentation.
7. Use the get command to get the binary file (for example:
PM_180.BIN) and enter pmfirmware as the destination filename
8. After the download completes, end the ftp connection, and verify the
presence of the pmfirmware file in the /tmp directory.
9. Log out from the console session and got to “To Upgrade Software on a
Connected IPDU.”
T To Upgrade Software on a Connected IPDU
Perform this procedure to upgrade the software on all connected AlterPath
PM IPDUs.
This procedure requires the following:
A more-recent version of the AlterPath PM software than the one shown
on the “Software Upgrade” form on the OnBoard must be available from
Cyclades, Corp.
The more-recent version of the AlterPath PM software has been
downloaded and copied into the OnBoard’s /tmp directory with the
ftp> get PM_180.BIN pmfirmware
local: pmfirmware remote: PM_180.BIN
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for PM_180.BIN (56916
bytes).
226 File send OK.
56916 bytes received in 0.01 secs (7783.5 kB/s)
ftp> bye
221 Goodbye.
[admin@OnBoard tmp]$ ls
deb.log pmfirmware
deb.log.old wmi