System information

Web Manager Wizard 135
Configuring Devices—Wizard
The following table defines the information that must be supplied in the fields
that define a virtual network:
T To Configure a Private Subnet and Optional
Virtual Network—Wizard
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager for the Administrative User” on page
108, if needed.
2. Click the “Wizard” button.
3. Click the “Subnets” option in the left menu bar.
4. Under “Virtual Network (DNAT) configuration,” enter the IP address
within the virtual network’s network address range in the “Address” field.
5. Enter a netmask in the “Netmask” field.
6. Click “Save and apply changes.”
7. Click the “Next” button, if desired, to go to the next Wizard step.
Configuring Devices—Wizard
Figure 4-16 shows the “Configure devices” screen that appears when the
“Devices” option is selected from the Wizard menu. As shown, the following
fields and menus appear:
The Data Buffering Default menu with options for “No” and “Yes (sets
the default for all devices)
Entries for each configured device
Table 4-5: Fields on the Private Subnet Virtual Network Configuration Dialog
Field Description
Address IP address to assign to the OnBoard from the virtual network. For example, if
the virtual IP address of the network is 10.0.0.0, 10.0.0.254 would a valid IP
address for the OnBoard that could be entered here.
Netmask Netmask (which is used in combination with the network address portion of the
“Address” above to define the address range of the virtual network), in the form
NNN.NNN.NNN.N, as in: 255.255.255.0.