System information

Web Manager Wizard 117
Selecting a Security Profile—Wizard
Caution! If the default password “cyclades” is still in effect, changing the
password now is essential to reduce the risk of intrusion. Leaving the
password unchanged leaves a security breach that makes all connected
equipment vulnerable.
T To Change the Administrative User’s
Password—Wizard
1. Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager for the Administrative User” on page
108, if needed.
2. Click the “Wizard” button.
The “Administrator Password” option is highlighted and the “Configure
Administrator Password” screen is active by default.
3. Enter a new password for the administrative user in the “Password” field
and retype it in the “Retype password” field.
4. Click the “Set Password” button to save the password.
Selecting a Security Profile—Wizard
Figure 4-1 shows the screen that appears when the “Security profile” option is
selected from the Wizard menu. The screen identifies the name of the security
profile currently in effect. For more details about the services and features
configured by default security profiles and what you can change in a custom
profile, see “OnBoard Security Profiles” on page 16.
The note at the bottom of the security profile configuration screen is a
reminder that putting another security profile into effect could disable or
enable services that may have been turned on or off by some other means. For
more details, see “OnBoard Services” on page 21.