System information

Administration Tasks Not Done in the Web Manager 97
Configuring Routes With cycli
2. Open the /etc/menu.ini file for editing.
3. Add new menus and menu items as desired, using underscores (_) to
indicate spaces between words.
4. Save and quit the file.
Configuring Routes With cycli
The following procedures give examples for using the cycli utility for
configuring the following types of routes and assigning them to interfaces or
to gateways.
• Default routes
Note: Setting a gateway IP address automatically creates a default route to
the gateway’s IP address.
•Host
• Network routes
T To Configure Routes With cycli
1. Log into the OnBoard’s console as root.
2. Enter the cycli command.
3. Make sure the interface for which you want to configure a route is active.
4. Set a default route by setting a gateway IP address.
cli> set network interface interface_name active yes
OK
cli> set network interface interface_name gateway gatewayIP
OK