System information

Administration Tasks Not Done in the Web Manager 83
Configuring VPN Connections
IPSec VPN Connections
For a user to access native IP functionality on a connected service processor,
the user needs to create a VPN connection to the OnBoard; launching an
IPSec VPN connection requires the user to have IPSec running on the
computer being used to manage OnBoard-connected devices.
The ESP and AH authentication protocols (also called “encapsulation
methods”) are supported. RSA Public Keys and Shared Secret are also
supported. Authentication information (username and password and
connection keys or certificates) is needed.
If the RSA public key authentication method is chosen, the generated keys are
different on each end. When shared secret is used, the secret is shared on both
ends.
The values needed for configuring IPSec VPN connections can shown in the
following table.
Table 2-4: IPSec VPN Configuration Information for Administrators and Users
Value Name Description
Connection
Name
Any descriptive name you choose.
Authentication
protocol
•AH
ESP
Authentication
method
RSA public keys
Shared secret
Boot action
Ignore
•Add
•Start
Add and route
Remote (“Right”)
ID
@workstation_name.
IP address
IP address of the users workstation.