System information
Administration Tasks Not Done in the Web Manager 77
Configuring the DHCP Server
Configuring the DHCP Server
To enable DHCP to configure IP address for connected devices, the
administrator must perform DHCP configuration manually. The root user logs
into the OnBoard command line and does the following steps.
• Enables the dhcpd by editing /etc/dhcpd.sh.
• Makes the appropriate configuration changes and specifies fixed
addresses for all devices in the /etc/dhcpd.conf file.
• Saves the configuration file changes in the firmware using the
saveconf command.
• Reboots or restarts the dhcpd service manually.
For an introduction to this topic, see DHCP on the OnBoard
T To Configure DHCP for Managing IP
Addresses of Connected Devices
1. Log into the OnBoard console as root.
2. Open the /etc/dhcpd.conf file for editing.
3. Copy and paste the ## SAMPLE CONFIGURATION #### section.