Installation guide

Installing PCMCIA Cards in the Front Card Slots
42 AlterPath OnBoard Installation Guide
T To Swap In a New PCMCIA Card
1. Do these steps if all the following are true:
• Only one card slot is in use
• The new card is the same type as the one already installed in the slot
• You want to replace the card in the current slot.
a. Eject the card.
See “To Remove a PCMCIA Card” on page 41, if needed.
b. Insert and configure the new card.
See “To Install a Single PCMCIA Card” on page 40 if needed.
2. If all the following are true, insert the new card into the empty slot and
configure the new card:
• Only one card slot is in use
• The new card is the same type as the one already installed in the slot
• You want to add the new card into the empty slot
See “To Install a Single PCMCIA Card” on page 40 if needed.
3. If both card slots are in use, do the following steps:
a. Eject the card.
See “To Remove a PCMCIA Card” on page 41, if needed.
b. Press the buttons next to both PCMCIA slots on the front of the Insert
and configure the new card.
See “To Install a Single PCMCIA Card” on page 40 if needed.