Installation guide

Installing PCMCIA Cards in the Front Card Slots
40 AlterPath OnBoard Installation Guide
Installing PCMCIA Cards in the Front Card Slots
See Table 1-4 on page 9 for a list of supported PCMCIA cards.
Order of installation is important, as described here:
• Two PCMCIA cards of different types can be installed in any order.
• Two PCMCIA cards of the same type must be installed in the following
order:
• Insert and configure the first card in slot 1.
• Insert and configure the second card in slot 2.
Swapping in new PCMCIA card may result in the configuration being lost on
one or both of the cards. Follow the procedure under “To Swap In a New
PCMCIA Card” on page 42 to remove any existing cards, insert and configure
the new card and reinsert and reconfigure the old card.
T To Install a Single PCMCIA Card
Note: Some cards take up both card slots.
1. Insert a PCMCIA card into a front slot(s) and slide the card in until it is
firmly seated.
2. If installing a modem card, use a phone cord to connect the card to a live
telephone line.
3. Use the Web Manager → Settings → PCMCIA form to configure the
PCMCIA card.
PCMCIA card slots
PCMCIA card