Installation guide

Installation 19
Shipping Box Contents
4.
For AC models, an
AC power cable.
For DC models,
you must wire the
OnBoard to your
own DC power
source. See “To
Connect DC Power
Terminal Blocks to
a DC Power
Source and Turn
OnBoard Power
On” on page 28.
To connect the OnBoard to an
AC power source. The
standard power for the
destination country is used to
determine which type of cord
is shipped. The ends of
available cords are shown in
the following rows. Talk with
a Cyclades sales
representative if the power
cable you need is not listed in
this table or if you have
special requirements.
CAB0010 NEMA5--15P. Flat
blades with round
grounding pin.
United States and other
countries.
CAB0037 Schuko. Round pin
attachment plug.
European and other
countries.
CAB0055 Oblique flat blades
with ground.
Australia, New Zealand, and
other countries.
Table 2-2: Shipping Box Contents, Part Numbers, and Description (Sheet 2 of 4)
# Item P/N Description Purpose