Installation guide

Introduction 11
IPDU Power Management Options
IPDU Power Management Options
AlterPath Power Management (PM) intelligent power distribution units
(IPDUs) can be connected to the AUX port on the OnBoard using a RJ-45 to
RJ-45 CAT-5 or better cable. Any combination of AlterPath PM models can
be daisy-chained to the AUX port to support management of up to a
maximum of 128 outlets.
The following figure shows an OnBoard from the back with an IPDU
connected to the AUX port and a second and third IPDU daisy-chained from
the first IPDU.
Figure 1-10:IPDUs Daisy-Chained to the AUX Port
AUX port
AC power source