Installation guide

LEDs
6 AlterPath OnBoard Installation Guide
Figure 1-4: Connecting the OnBoard to Devices
After devices are connected to the OnBoard, the administrator must configure
the devices as described in the AlterPath OnBoard Administrator’s Guide.
LEDs
Each private 10/100 Megabit/second Ethernet port has two LEDs. The
following figure illustrates a close-up view of LEDs on some of the private
Ethernet ports. The LED on the left blinks green for any detected activity
(ACT). The LED on the right (LK/SP) is solid green when the speed is 100
Megabits/second, and it is solid yellow when the speed is 10 Megabits/
second.
Service processor’s dedicated Ethernet port
on a server or blade manager
Server or other device’s dedicated Ethernet
port