Service manual

Cyclades-TS
92
Appendix A - Linux
Installation & Service Manual
> ts_menu
Master and Slaves Console Server Connection Menu
1 64.186.161.113/TSJen800
2 64.186.161.82 /edson-r4.Cyclades.com
3 64.186.161.84 /az84.Cyclades.com
4 64.186.190.85
5 64.186.161.85 /az85.Cyclades.com
Type 'q' to quit, a valid option [1-5], or anything else to refresh:
Selecting 1 in this example, and the user will access the local serial ports on that Cyclades-TS. In case the user
selects 2 through 5, remote serial ports will be accessed. This is used when there is clustering (one Cyclades-
TS master box and one ore more Cyclades-TS slave boxes).
In case the user selects 1 the possible screen to be displayed would be
Serial Console Server Connection Menu for your Master Terminal Server
1 ttyS1 2 ttyS2 3 s3serverfarm
Type 'q' to quit, 'b' to return to previous menu, a valid option[1-
3], or anything else to refresh:
Options 1 to 3 in this case are serial ports configured to work as CAS profile. Serial port 3 is presented as an
alias name (s3serverfarm). When no name is configured in pslave.conf, ttyS<N> is used instead.
Once selected the serial port, the username and password for that port (in case there is a per user access to the
port and -U is passed as parameter) will be presented. Otherwise, the acess is granted.