Service manual

Cyclades-TS

Chapter 2 - Safety Instructions

Installation & Service Manual

CHAPTER 2 SAFETY INSTRUCTIONS

Use the following safety guidelines to protect yourself and your Cyclades-TS.

USING YOUR CYCLADES-TS

CAUTION: Do not operate your Cyclades-TS with the cover removed.

· In order to avoid shorting out your Cyclades-TS when disconnecting the network cable, first unplug the cable

from the equipment and then from the network jack. When reconnecting a network cable to the equipment,

first plug the cable into the network jack, and then into the equipment.

· To help prevent electric shock, plug the Cyclades-TS into a properly grounded power source. The cable is

equipped with a 3-prong plug to help ensure proper grounding. Do not use adapter plugs or remove the

grounding prong from the cable. If you have to use an extension cable, use a 3-wire cable with properly

grounded plugs.

· To help protect the Cyclades-TS from electrical power fluctuations, use a surge suppressor, line conditioner,

or uninterruptible power supply.

· Be sure that nothing rests on the cables of the Cyclades-TS and that they are not located where they can be

stepped on or tripped over.

· Do not spill food or liquids on the Cyclades-TS. If it gets wet, contact Cyclades.

· Do not push any objects through the openings of the Cyclades-TS. Doing so can cause fire or electric shock

by shorting out interior components.

· Keep your Cyclades-TS away from heat sources and do not block cooling vents.