Service manual

Chapter 6 Configuration 57
Cyclades-TS Installation & Service Manual
After rebooting the TS100, the initial configuration is complete.
Clustering
Clustering has been added to the Cyclades-TS with firmware version 1.3.0 (except for the TS100). It allows the
stringing of Terminal Servers so that one master Cyclades-TS can be used to access all Cyclades-TSs on a LAN.
The master Cyclades-TS can manage up to 512 serial ports, so
• 1 Master TS1000 + 31 slave TS1000s, or
• 1 Master TS2000 + 15 slave TS2000s, or
• 1 Master TS3000 + 9 slave TS3000s + 1 slave TS2000
can be clustered.
An example with one master TS2000 and two slave TS2000s is shown in Figure 6.15.