Service manual

Chapter 6 Configuration 53
Cyclades-TS Installation & Service Manual
Parameter Description Value for This Example
all.initchat Modem initialization string. TIMEOUT 10 "" \d\l\dATZ \
OK\r\n-ATZ-OK\r\n "" \
"" ATMO OK\R\N "" \
TIMEOUT 3600 RING "" \
STATUS Incoming %p:I.HANDSHAKE "" ATA
\
TIMEOUT 60 CONNECT@ "" \
STATUS Connected %p:I.HANDSHAKE
all.flow This sets the flow control to hardware,
software, or none.
hard
all.autoppp PPP options to auto-detect a ppp session.
The cb-script parameter defines the file used
for callback and enables negotiation with the
callback server. Callback is available in
combination with Radius Server
authentication. When a registered user calls
the TS, it will disconnect the user, then call
the user back. The following three
parameters must be configured in the Radius
Server: attribute Service_type(6) : Callback
Framed; attribute Framed_Protocol(7): PPP;
attribute Callback_Number(19): the dial
number (example: 50903300).
%i:%j novj \
proxyarp modem asyncmap 000A0000 \
noipx noccp login auth require-pap refuse-
chap \
mtu %t mru %t \
cb-script /etc/portslave/cb_script \
plugin /usr/lib/libpsr.so
all.pppopt PPP options when user has already been
authenticated.
%i:%j novj \
proxyarp modem asyncmap 000A0000 \
noipx noccp mtu %t mru %t netmask %m \
idle %I maxconnect %T \
plugin /usr/lib/libpsr.so