Service manual

Chapter 6 Configuration 51

Cyclades-TS Installation & Service Manual

Parameter Description Value for

This

Example

all.speed The speed for all ports.

This value (as for any "all." parameters) can later

be overridden for individual ports using the

.speed parameter.

57600

all.datasize The data size for all ports. 8

all.stopbits The number of stop bits for all ports 1

all.parity The parity for all ports. none

all.authtype There are several authentication type options: local (authentication is

performed using the /etc/passwd file), radius (authentication is performed

using a Radius authentication server), TacacsPlus (authentication is

performed using a TacacsPlus authentication server), none, local/radius

(authentication is performed locally first, switching to Radius if unsuccessful),

radius/local (the opposite of the previous option), RadiusDownLocal (local

authentication is tried only when the Radius server is down), local/TacacsPlus

(authentication is performed locally first, switching to TacacsPlus if

unsuccessful), TacacsPlus/local (the opposite of the previous option),

TacacsPlusDownLocal (local authentication is tried only when the TacacsPlus

server is down). Note that this parameter controls the authentication required

by the Cyclades-TS. The authentication required by the device to which the

user is connecting is controlled separately.

radius

all.authhost1 This address indicates the location of the Radius/TacacsPlus

authentication server and is only necessary if this option is chosen in the

previous parameter. A second Radius/TacacsPlus authentication server

can be configured with the parameter all.authhost2.

200.200.200.2

FIGURE 6.13 REMOTE ACCESS SERVER PSLAVE.CONF PORT-SPECIFIC PARAMETERS