Service manual

Chapter 6 Configuration 50
Cyclades-TS Installation & Service Manual
Parameter Description Value for
This Example
conf.eth_ip The IP address of the Ethernet interface. This parameter, along with the
next two, is used by the cy_ras program to OVERWRITE the file
/etc/network/ifcfg_eth0 as soon as the command "signal_ras hup" is
executed. The file /etc/network/ifcfg_eth0 should not be edited by the user
unless the cy_ras application is not going to be used.
200.200.200.1
conf.eth_mask The mask for the Ethernet network. 255.255.255.0
conf.eth_mtu The Maximum Transmission Unit size, which determines whether or not
packets should be broken up.
1500
conf.lockdir The lock directory , which is /var/lock for the Cyclades-TS. It should not be
changed unless the user decides to customize the operating system.
/var/lock
conf.pppd Location of the ppp daemon with Radius/TacacsPlus. /usr/local/sbin/
pppd
conf.facility This value (0-7) is the Local facility sent to the syslog. The file /etc/syslog-
ng/syslog-ng.conf contains a mapping between the facility number and the
action (see more in Appendix G).
7
FIGURE 6.12 REMOTE ACCESS SERVER PSLAVE.CONF GLOBAL PARAMETERS