Service manual

Chapter 6 Configuration 34
Cyclades-TS Installation & Service Manual
Parameter Description Value for This
Example
all.authtype There are several authentication type options: local (authentication is
performed using the /etc/passwd file), radius (authentication is
performed using a Radius authentication server), TacacsPlus
(authentication is performed using a TacacsPlus authentication server),
none, local/radius (authentication is performed locally first, switching to
Radius if unsuccessful), radius/local (the opposite of the previous
option), RadiusDownLocal (local authentication is tried only when the
Radius server is down), local/TacacsPlus (authentication is performed
locally first, switching to TacacsPlus if unsuccessful), TacacsPlus/local
(the opposite of the previous option), TacacsPlusDownLocal (local
authentication is tried only when the TacacsPlus server is down). Note
that this parameter controls the authentication required by the Cyclades-
TS. The authentication required by the device to which the user is
connecting is controlled separately.
radius
all.authhost1 This address indicates the location of the Radius/TacacsPlus
authentication server and is only necessary if this option is chosen in the
previous parameter. A second Radius/TacacsPlus authentication server
can be configured with the parameter all.authhost2.
200.200.200.2
all.accthost1 This address indicates the location of the Radius/TacacsPlus accounting
server, which can be used to track how long users are connected after
being authorized by the authentication server. Its use is optional. If this
parameter is not used, accounting will not be performed. If the same
server is used for authentication and accounting, both parameters must
be filled with the same address. A second Radius/TacacsPlus
accounting server can be configured with the parameter all.accthost2.
200.200.200.2
FIGURE 6.7 CONSOLE SERVER PSLAVE.CONF PORT-SPECIFIC PARAMETERS(CONT.)