Service manual

Appendix F Configuration Wizard 148
Cyclades-TS Installation & Service Manual
Using Wizard through WEB
The web interface supports wizards for the serial ports configuration. The following profiles are supported for the
serial ports:
• Console Access Server (CAS) profile
• Terminal Server (TS) profile
• Remote Access Server (RAS) profile
• Automation Profile (a subset of CAS profile, only for the Cyclades-TS100)
Most of the applications should fit in one of these profiles, so the wizard is a useful tool to ease the configuration
of the serial ports. The web interface will access the wizard files for each profile:
• /etc/portslave/pslave.wiz.cas (CAS profile)
• /etc/portslave/pslave.wiz.ts (TS profile)
• /etc/portslave/pslave.wiz.ras (RAS profile)
• /etc/portslave/pslave.wiz.auto (Automation profile)
The wizard configuration is set by pressing one of the buttons which appear in the
Wizard section in the Serial
Port Configuration page. The default parameters will then be set in the page and, after that, the user must change
the parameters which need to be changed, and then press the
Submit button.
The tables below show the values of the parameters which will be set for each profile. The parameters in bold
are the ones whose value will probably be required to change.