Service manual

Cyclades-TS
116
Appendix C - Sample pslave.conf files-The complete pslave.conf file
Installation & Service Manual
#
# IP Address assigned to the serial port.
# The '+' after the value causes the interfaces to have
# consecutive ip addresses. Ex. 192.168.1.101, 192.168.1.107, etc.
#
# The IP number of a port is used when the RADIUS
# server does not send an IP number, or if it tells us to use a dynamic IP no.
#
all.ipno 192.168.1.101+
all.netmask 255.255.255.255
#
# Maximum reception/transmission unit size for the port
#
all.mtu 1500
all.mru 1500
#
# Standard message issued on connect.
#
all.issue \r\n\
TSLINUX - Portslave Internet Services\n\
\r\n\
Welcome to terminal server %h port S%p \n\
\r\n\
Customer Support: 510-770-9727 http://www.cyclades.com/\n\
\r\n
#
# Login prompt.
#
all.prompt %h login:
#
# Terminal type, for rlogin/telnet sessions.
#
all.term vt100
#
# If you want the Terminal Server to update the
# login records (written to the /var/run/utmp and/or /var/log/wtmp
# files), set sysutmp/syswtmp to 1. This is useful for tracking