Installation manual

Cyclades-TS

Installation Manual

Appendix C - Sample pslave.conf files-The complete pslave.conf file

# When non-zero, the contents of the data buffer are sent to the syslog

# server every time a quantity of data equal to this parameter is collected.

# [40 to 255 recomended]

# all.syslog_level should be greater than or equal to 5, and data_buffering

# non-zero for syslog generation.

all.syslog_buffering 0

# Show Data buffering menu options if parameter is set to zero

# MENU:

# "A non-empty Data Buffering File was found. Choose wich action

# should be taken ( (I)gnore, (D)isplay, (E)rase or (S)how and erase ) :"

#all.dont_show_DBmenu 1

# Send Break to the TTY when this string is received (ssh only).

all.break_sequence ~break

# Authentication of Radius users registered without passwords

# When enabled (value 1) and a user registered in

# the Radius database with a blank password tries to log in, the user

# is authenticated. This is a very weak level of security since

# a user would only need to know that a particular username exists.

# This does not affect Radius users registered with passwords.

all.radnullpass 0

# Automatic User Definition (more useful when used to a specific port)

# This parameter is only used if the port is configured as a Terminal Server

# (login, telnet, rlogin, ssh and ssh2) and authentication type 'none'.

#all.userauto edson