Installation manual

Cyclades-TS

Installation Manual

Appendix C - Sample pslave.conf files-The complete pslave.conf file

all.accthost1 192.168.160.3

all.radtimeout 3

all.radretries 5

#all.authhost2 192.168.160.4

#all.accthost2 192.168.160.4

# The shared secret used by RADIUS.

all.secret cyclades

# Default protocol.

# Valid values are "login", "rlogin", "telnet",

# "ssh", "ssh2", "slip", "cslip", "ppp", "ppp_only", "socket_client",

# "socket_server" and "socket_ssh".

# ppp_only ==> PPP over leased lines (only authentication PAP/CHAP)

# ppp ==> PPP with terminal post dialing (Auto detect PPP)

all.protocolsocket_server

# Default ip address of linux host to which the terminals will connect.

# Used by the protocols rlogin, ssh, socket_client, etc.

all.host 192.168.160.8

# IP Address assigned to the serial port.

# The '+' after the value causes the interfaces to have

# consecutive ip addresses. Ex. 192.168.1.101, 192.168.1.107, etc.

# The IP number of a port is used when the RADIUS

# server does not send an IP number, or if it tells us to use a dynamic IP no.

all.ipno 192.168.1.101+

all.netmask 255.255.255.255

# Maximum reception/transmission unit size for the port