Installation manual

Cyclades-TS

Installation Manual

Appendix C - Sample pslave.conf files-The complete pslave.conf file

# %l: login name

# %L: stripped login name

# %p: NAS port number

# %P: protocol

# %b: port speed

# %i: local IP

# %j: remote IP

# %1: first byte (MSB) of remote IP

# %2: second byte of remote IP

# %3: third byte of remote IP

# %4: fourth (LSB) byte of remote IP

# %c: connect-info

# %m: netmask

# %t: MTU

# %r: MRU

# %I: idle timeout

# %T: session timeout

# %h: hostname

# %%: %

# Generic SAMPLE:

# all async ports at 9600 bps, 8N1

# Eth IP address 192.169.160.10/24 (MTU=1500)

# protocol socket_server

# host IP 192.168.160.8/24

# syslogd IP 192.168.160.1

# Radius Server IP 192.168.160.3 (authentication and accounting)

# authentication radius

# Ethernet configuration.

# These parameters should only be configured in the file

# /etc/network/ifcfg_eth0 _IF_ the customer will not be using the

# cy_ras/portslave aplications. If the cy_ras/portslave aplications are _NOT_

# used put all ifconfig commands for the ethernet directly in the

# /etc/network/ifcfg_eth0.

# The cy_ras application OVERWRITES the ifcfg_eth0 file with the

# values configured here.