Installation manual

Cyclades-TS

Appendix A - Linux

Installation Manual

> ts_menu

Cyclades-TS: Serial Console Server Connection menu

1 ttyS1 2 snoopy 3 linus 4 lucy

5 charlie 6 vt100-ssh

Type 'q' to quit, a valid option [1-6], or anything else to refresh :

selecting option 2 will telnet/ssh to the server snoopy. The names defined using the parameter serverfarm are

used to make up the list. When no name is configured, ttyS<N> is used where N is the port number.

the ts_menu script has the following line options:

-p : Displays Ethernet IP Address and TCP port instead of server names

Cyclades-TS: Serial Console Server Connection menu

1 209.81.55.79 7001 2 209.81.55.79 7002 3 209.81.55.79 7003

4 209.81.55.79 7004 5 209.81.55.79 7005 6 209.81.55.79 7006

Type 'q' to quit, a valid option [1-6], or anything else to refresh :

-i : Displays Local IP assigned to the serial port instead of server names

Cyclades-TS: Serial Console Server Connection menu

1 192.168.1.101 2 192.168.1.102 3 192.168.1.103 4 192.168.1.104

5 192.168.1.105 6 192.168.1.106

Type 'q' to quit, a valid option [1-6], or anything else to refresh :

-u <name> : Username to be used in ssh/telnet command. The default username is that used to log in to the

Cyclades-TS.

-h : lists script options