Installation manual

41Chapter 5 Upgrades and Troubleshooting
Cyclades-TS Installation Manual
File Program
/etc/securetty telnet, login, su
/etc/issue getty
/etc/getty_ttyS0 login (via console)
/etc/hostname tcp
/etc/hosts tcp
/etc/host.conf tcp
/etc/nsswitch.conf dns
/etc/resolv.conf dns
/etc/config_files saveconf
/etc/passwd login, passwd, adduser...
/etc/group login, passwd, adduser...
/etc/ssh/ssh_host_key.pub sshd
/etc/ssh/sshd_config sshd
/etc/ssh/ssh_config ssh client
/etc/ssh/ssh_host_key sshd (ssh1)
/etc/ssh/ssh_host_key.pub sshd (ssh1)
/etc/ssh/ssh_host_dsa_key sshd (ssh2)
/etc/ssh/ssh_host_dsa_key.pub sshd (ssh2)
/etc/snmp/snmpd.conf snmpd
/etc/portslave/pslave.conf cy_ras, portslave, TS configuration information
/etc/network/ifcfg_eth0 ifconfig eth0, cy_ras, rc.sysconf
/etc/network/ifcfg* ifconfig, cy_ras, rc.sysinit
/etc/network/ifcfg_lo ifconfig lo, cy_ras, rc.sysinit
/var/run/radsession.id radinit, radius authentication process
/home adduser, passwd
/etc/network/st_routes ifconfig, cy_ras, rc.sysconf
If any of the files listed in /etc/config_files is modified, the Cyclades-TS administrator must execute the
command saveconf before rebooting the Cyclades-TS or the changes will be lost. If a file is created (or a file