Installation manual

Chapter 4 Configuration 33
Cyclades-TS Installation Manual
Parameter Description Value for This Example
all.initchat Modem initialization string. TIMEOUT 10 "" \d\l\dATZ \
OK\r\n-ATZ-OK\r\n "" \
"" ATMO OK\R\N "" \
TIMEOUT 3600 RING "" \
STATUS Incoming %p:I.HANDSHAKE "" ATA \
TIMEOUT 60 CONNECT@ "" \
STATUS Connected %p:I.HANDSHAKE
all.flow This sets the flow control to hardware,
software, or none.
hard
all.autoppp PPP options to auto-detect a ppp
session.
%i:%j novj \
proxyarp modem asyncmap 000A0000 \
noipx noccp login auth require-pap refuse-chap \
mtu %t mru %t \
plugin /usr/lib/libpsr.so
all.pppopt PPP options when user has already
been authenticated.
%i:%j novj \
proxyarp modem asyncmap 000A0000 \
noipx noccp mtu %t mru %t netmask %m \
idle %I maxconnect %T \
plugin /usr/lib/libpsr.so
s1.tty The device name for the port is set to the
value given in this parameter. If a device
name is not provided for a port, it will not
function.
ttyS1
s32.tty See the s1.tty entry in this table. ttyS32
FIGURE 4.13 REMOTE ACCESS SERVER PSLAVE.CONF PORT-SPECIFIC PARAMETERS (CONTINUED)