Installation manual

Chapter 4 Configuration 27
Cyclades-TS Installation Manual
Parameter Description Value for
This Example
all.issue This text determines the format of
the login banner that is issued when
a connection is made to the
Cyclades-TS. \n represents a new
line and \r represents a carriage
return.
\r\n\ TSLINUX - Portslave Internet Services\n\
\r\n\ Welcome to terminal server %h port S%p \n\
\r\n\ Customer Support: 510-770-9727
www.cyclades.com/\n\
\r\n
all.prompt This text defines the format of the login prompt. Expansion characters,
listed in Appendix C, can be used here.
%h login:
all.term This parameter defines the terminal type assumed when performing
rlogin or telnet to other hosts.
vt100
all.flow This sets the flow control to hardware, software, or none. hard
all.socket_port This parameter defines the port(s) to be used by the protocols telnet,
socket_client and socket_server. It is mandatory for the socket_server
protocol; for the other two protocols a default value of 23 is used when
no value is configured.
23
all.users Restricts access to a port by user name (only the users listed can access
the port or all but the users listed can access the port (with !).)
A single comma and spaces/tabs may be used between names. A
comma may not appear between the ! and the first user name. The
users may be local or Radius.
! joe, mark
s1.tty The device name for the port is set to the value given in this parameter.
If a device name is not provided for a port, it will not function.
ttyS1
s16.tty See the s1.tty entry in this table. ttyS16
FIGURE 4.10 TERMINAL SERVER PSLAVE.CONF PORT-SPECIFIC PARAMETERS (CONTINUED)