User's Manual

19
Do Not Disturb
Press the [MENU] softkey, select ‘HS
SETTINGS’ and press [OK].
Select ‘RING SETUP’ by using ▲ / ▼
and then press [OK].
Select ‘DO NOT DISTURB’, then press
[OK].
Press ▲ / ▼ to choose ‘OFF’ or ‘ON’,
then press [OK] to save your setting.
If this option is set to ‘ON’, the screen will display “DO NOT DISTURB” in standby
mode. Then no ring will be heard from any exterior-line (fixed line) call; but the call
information will still be displayed on the screen, and you can also answer the call if
you want.

LINERING
↑
DONOTDISTURB
OKEXIT

OFF
↓
ON
OKEXIT
HANDSET SETTINGS