User's Manual

16
Use ▲ / ▼ to choose between the two
options and then press [SAVE] to save
your setting.
(‘SHORT’ = 300, ‘LONG’ = 650)
Set Base to Default
This function allows the user to restore the base settings to factory default.
Press the [MENU] softkey
Use ▲ / ▼ to select ‘BS SETTINGS’ and
press [OK] softkey.
Select ‘BASE DEFAULT’ and press [OK]
softkey.
Input the 4-digit PIN.
The default PIN is on the backside label
of the base.
Press [OK] softkey to complete.
Then all settings of the base will revert to
factory default values.

SHORT
↑
LONG
SAVEEXIT

MODIFYPIN
↑
BASEDEFAULT
OKEXIT

PIN?****

OKDELEXIT
BASE SETTINGS VIA HANDSET