User's Manual

15
Modify PIN
Press the [MENU] softkey, select ‘BS SETTINGS’ and press [OK].
Use ▲ / ▼ to select ‘MODIFY PIN’ and press [OK].
Input the current 4-digit PIN.
Press [OK] to complete.
The default PIN is on the backside label
of the base.
Input the new 4-digit PIN.
Press [OK] to complete.
Input the new PIN again to confirm.
Press [OK] to complete.
Please do not forget this new PIN code.
Now the new PIN will be stored in the
base unit.
Flash Time
This function allows the user to set the flash time parameter according to your
local telephone network settings when using the [Flash] key in some services,
such as call waiting service and conference calling service, etc.
Press the [MENU] softkey, select ‘BS
SETTINGS’ and press [OK].
Use ▲ / ▼ to select ‘FLASH TIME’ and
press [OK].

PIN?****

OKDELEXIT

NEWPIN****

OKDELEXIT

CONFIRM****

OKDELEXIT

DIALMODE
FLASHTIME
OKEXIT
BASE SETTINGS VIA HANDSET