User's Manual

44
Telephone Answering Machine setting
You can change the TAM setting via a registered handset.
Set date/time/weekday
Prior to playing a message, the answering machine announces when the message
was received. Before using the answering machine, set the date, time and weekday,
so that messages are dated correctly. To change these settings, refer to handset
setting for detailed operation (see page 24).
Set message alert tone
Your telephone base can be set to beep every 1 minute to alert you of the new
messages ready for your review. To enable this feature:
1. On your handset, press [MENU] key
to display the menu when the handset
is not in use.
2. Press ▲ or ▼ to select TAM then
press [OK].
3. Press ▲ or ▼ to select TAM
SETTING then press [OK].
4. Press ▲ or ▼ to select TAM ALERT
then press [OK].
5. Press ▲ or ▼ to select ON or OFF
then press [SAVE].
You will hear a confirmation tone

MEMO
↑
TAMSETTING
OKEXIT

REGISTRATION
↑
TAM

TAMON/OFF↓
TAMALERT
OKEXIT

OFF
↑
ON
Answering System