User's Manual
38
When the intercom call is established, on
the initiating handset {in this case is
Handset (1)}, pressing the [Int.] key can
switch between the intercom talk and
external line talk.
After the initiating handset being switched
to ‘INTC’ (intercom) call, press the [CONF]
key on the initiating handset can talk with
the two parties (external line party, and
intercom party) simultaneously, which is
the conference mode.
On any handset, pressing
or [EXIT]
can retreat from the current conversation
and return to standby mode. The other
handset will continue the external line call.
To end the call, make sure that both
handsets have quit.
Note: If your handset has already retreated from the conversation; you can still join
into the conversation again by following the procedures stated on Page 36.
LINE00:00:09
INTCONHOLD
MUTE
CONF00:00:23
MUTEEXIT
LINE00:02:48
MUTEDIR.
CALL CONFERENCING