User's Manual
36
the [EXIT] softkey, then the ring will stop.
Note: If two handsets are engaging in an intercom talk when an external line
incoming both handsets can hear one beep tone.
Transfer a Call to another Handset
During a call, the current call can be transferred to another handset as described
below. (in this case an expandable handset is required)
When a handset is engaging in an
external line (outside land line) call.
Press the [Int.] key and use ▲ / ▼ to
scroll to the handset you want to transfer
this call to, then press the [CALL] softkey.
If you do this from HS (1) to HS (2), then
HS (2) rings and displays ‘PAGING
FROM HS (1)’.
On Handset (2), press
, [Int.] or [OK]
to answer the paging and then talk with
Handset (1). (Internal talk).
Now the initiator of the transfer can talk
with the party to be transferred to, and
then the initiator can press
to
complete the transfer.
If the party being transferred to does not
want to answer the paging, press
or
the [EXIT] softkey to reject it.
Then the handset being paged stops
ringing and returns to standby mode, and
the initiating handset resumes the
external line talk.
HS2
HS3
CALLEXIT
PAGINGFROM
HS(1)
OKEXIT
INTC00:00:01
MUTE
EXIT
12–25 13:59 P
HS (1)
MENUDIR.
PAGING AND INTERCOM