User's Manual

23
Auto Answer
The handset can be set to answer incoming calls automatically. When the handset
is not on the base unit or the charger cradle, must be pressed to answer
incoming calls. Auto answer mode can only be activated when the handset is on
the base unit or charger cradle, in which case, the line will be automatically
connected when the handset is picked up from the base unit or charger cradle.
Set Auto Answer Mode On/Off
Press the [MENU] softkey.
Use ▲ / ▼ to select ‘HS SETTINGS’ and
press [OK].
Select ‘AUTO ANSWER’ and press [OK].
Use ▲ / ▼ to select ‘OFF’ or ‘ON’.
Press [OK] to save your setting.
Call Barring
Handset can be set to disable outgoing
outside land line calls.
To set the call barring mode ‘ON’ or ‘OFF’
Press the [MENU] softkey.
Use ▲ / ▼ to select ‘HS SETTINGS’ and
press [OK].
Select ‘CALL BARRING’ and press [OK].
Input the 4-digit PIN.
The default PIN is 0000.
Press [OK] to confirm.

HSLABEL

AUTOANSWER

OKEXIT

OFF
↓
ON
OKEXIT

AUTOANSWER

CALLBARRING

OKEXIT

PIN?****

OKEXIT
HANDSET SETTINGS