User's Manual

19
Use ▲ / ▼ to select the type of ring that
you want use.
You can assign different ringtones and
volumes for incoming intercom calls, and
outside land line call (‘INTC’ is for intercom
calls and ‘LINE’ is for outside landline call).
Press the [OK] softkey.
Use ▲ / ▼ to select ‘MELODY’ or
‘VOLUME’ setting.
If you enter the ‘MELODY’ setting
Use ▲ / ▼ to select a melody.
Press the [SAVE] softkey, to save your
setting.
If you enter the ‘VOLUME’ setting.
Use ▲ / ▼ to select a volume level.
Press the [SAVE] softkey, to save your
setting.
Configure Ringtone for Incoming Calls via External line
Press the [MENU] softkey, select ‘HS SETTINGS’ and press [OK]. Select ‘RING
SETUP’ by using ▲ / ▼ and then pressing [OK].
Select ‘LINE RING’, and then press [OK].
Select ‘MELODY’, and then press [OK].
Press ▲ / ▼ to select the desired ringtone, then press the [SAVE] softkey to save
your setting.
Configure Ring Volume for Incoming Calls via External line
Press the [MENU] softkey, select ‘HS SETTINGS’ and press [OK]. Select ‘RING
SETUP’ by using ▲ / ▼ and then pressing [OK].
Select ‘LINE RING’, and then press [OK].
Select ‘VOLUME’, and then press [OK].
Press ▲ / ▼ to select the desired volume, then press the [SAVE] softkey to save
your setting.
INTCRING ↓
LINERING
OKEXIT
MELODY ↓
VOLUME 
OKEXIT

MELODY1
↓
MELODY2

SAVEEXIT

VOLUME2
↑
VOLUME1

SAVEEXIT
HANDSET SETTINGS