User's Manual

16
Flash Time
This function allows the user to set the flash time parameter according to your local
telephone network settings when using the [Flash] key in some services, such as
call waiting service and conference calling service, etc.
Press the [MENU] softkey, select ‘BS
SETTINGS’ and press [OK].
Use ▲ / ▼ to select ‘FLASH TIME’ and
press [OK].
Use ▲ / ▼ to choose between the two
options and then press [SAVE] to save
your setting.
(‘SHORT’ = 300ms, ‘LONG’ = 650ms)
Modify PIN
Press the [MENU] softkey, select ‘BS SETTINGS’, and press [OK].
Use ▲ / ▼ to select ‘MODIFY PIN’ and press [OK].
Input the current 4-digit PIN.
Press [OK] to complete.
The default PIN is 0000
.

DIALMODE

FLASHTIME

OKEXIT

SHORT
↑
LONG
SAVEEXIT


PIN ? ****
OKDELEXIT
BASE SETTINGS VIA HANDSET