User's Manual

Registration

Before registering a handset to the base unit, the base unit should first enter the

registration mode.

Press the [Page] key on the base for more than 3 seconds until the ‘Line-in-use’

indicator begins to flash quickly.

An unregistered handset displays as

shown.

Press the [MENU] softkey, and then the

[OK] softkey to enter ‘REGISTRATION’.

After pressing the [OK] softkey, a list of

bases will be displayed.

There are 4 base positions available for

registration.

Select the BASE among BASE1 - BASE4,

(For the first time of use, select ‘BASE1’),

then press the [SEL] softkey.

Now the handset begins searching for the

base.



UNREGISTERED





MENUDIR.

REGISTRATION





OKEXIT



BASE1

↓

BASE2

SELEXIT



SEARCHING1





EXIT

USING YOUR PHONE