User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
35
When the call is on hold, “CALL ON HOLD” appears on
all handset and the base unit LCD.
Press [HOLD] key again or [Talk] key to release.
Note: The call can be picked up by the base unit or any handset registered to the same
base unit by pressing [;] or [Talk] key.
SENDING TONE SIGNALS IN PULSE DIALING MODE
If your telephone line uses pulse dialing (such as for a rotary dial phone), you can
temporarily override the Pulse Mode setting with the Tone Mode until the unit goes back
on-hook. This may be necessary for accessing certain special services such as
bank-by-phone service:
1. Use pulse dialing to call the service.
2. When the service answers, press [½].
3. Follow the normal procedure of the special service you are using. Any additional
numbers you dial are sent as tone signals.
4. When you hang up, the telephone returns to pulse mode.
DIAL VOICE MAIL
If you have subscribed to the Voice Mail and Message Waiting Indicator services, you
can access your voice mail system by pressing [DIAL V.M.] softkey. To use this feature,
you must first program your voicemail access number into the handset and base unit.
Programming your own Voicemail access number
Press the [DIAL V.M.] softkey.
Press the [SAVE] softkey to enter your access number.
If you make a mistake, press [DELETE] to erase the last
digit and re-enter.
Press [SAVE] to confirm your programming.
Then you are ready to use the [Dial V. M.] softkey.
CALL ON HOLD
HOLD
DIAL VOICE MAIL
USE SAVE = +NEW
EXIT
SAVE
DIAL VOICE MAIL
123╴
USE SAVE = DONE
EXIT DELETE
SAVE
ADVANCED OPERATION