User's Manual

34
FLASH
Call Waiting
1. Use the [Flash] key for accessing Call Waiting service. For example, if you receive a
second call during your initial call, press [Flash] to swap to the waiting call and put
the initial caller on hold.
2. After you finish the conversation with the second caller, press [Flash] to return to the
first caller.
Note: If you also have conference 3-Way Calling service, press [Flash] to allow the first
caller to enter into a conference call with you and the second caller.
3-Way Calling
‘3-way calling’ can be achieved either by pressing the [Flash] key or the [3WAY] softkey.
(For details, please refer to the 3-Way Calling section on page 37)
Note: May require subscription from your telephone company or may be available on a
charged usage basis.
PAUSE
The [Pause] key allows you to add a 3-second pause in a phone number sequence
during pre-dialing or while storing a number in the Phone Directory.
Entering a Pause in Dialing Sequence
To add a pause, press [Redial/Pause] key at the desired position when you are creating
or editing a phone number and “P” appears on the LCD. For a longer delay, press
[Redial/Pause] additional times.
Note: Remember, the phone number you are going to store cannot have more than 24
digits, including any ‘pause’. Each “P” counts as one digit.
HOLD
A call can be put on hold during conversation to allow you to talk to another handset
using intercom or transfer the call to another handset.
When engaged in an external line call on the handset,
press the [HOLD] softkey.
1234567
0:01:30 VOL-2 
HOLD
3WAY
SERVICE DIR. DIAL V.M.
ADVANCED OPERATION