User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
32
PAGING and INTERCOM
Locating misplaced handset(s)
To locate handset(s) not on the base unit, first, press
[Int./Page] key on the base unit.
Then, to locate a specific handset, use [▼] / [▲] to select
the handset name and press [O.K.] softkey to page.
To locate all handsets in range, select “ALL HS” and
press [O.K.].
The paged handset(s) in range will display “PAGING FROM BASE” and emit an alert
signal that is different from others (e.g. the incoming call alert).
If the paged handset is set to intercom Auto Answer Mode (refer to page 28), it will be
connected automatically in the speakerphone mode.
To stop the paging, press [Int./Page] again or press [EXIT] on the handset / base unit. If
no handset answers, the paging will automatically stop after 30 seconds.
Note: The handset being paged will ring even if the ringer volume is set to “OFF”.
Intercom between handsets
A handset can intercom with another handset registered
to the same base unit. (For details, please refer to page
48)
SETTING ALARM
An alarm may be set to remind you of an important time of the day.
Press [MENU] softkey.
Use [▼] / [▲] to select “SET ALARM”.
Press [O.K.] to enter into the selection.
Use [EDIT] to switch the alarm “ON” or “OFF”.
Use [▼] / [▲] and the keypad to set the alarm time.
Press [SAVE] to confirm setting, and press [EXIT] to
return to stand-by.
When the alarm is switched on, an alarm icon will be
displayed
Note: The alarm is only active when the phone is idle. If you are accessing the menu or
having a conversation at the alarm time, the alarm will be delayed until the phone returns
to idle.
INTERCOM
HS (1) L
HS (2)
O.K. EXIT
INTERCOM
HS (2) L
HS (3)
O.K. EXIT
ALARM:
v
OFF
[EDIT]->ON/OFF
EDIT EXIT
SAVE
30 NEW CALLS
HS (1)
09:38AM 01/01
SAVE SERVICE MENU DIR. DIAL V.M.
BASIC OPERATION