User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
29
MAKING A CALL
Direct Dialing from Handset
Press [Talk] key and listen for the dial tone.
The “Line indicator” on the handset and the base unit will
be lit.
— OR —
Press [Spk.] key and listen for the dial tone.
The Speakerphone indicator on the handset will be lit.
Note: If the line is engaged by another handset, “CONFERENCE” will appear on the LCD
of both handsets and you can join the current conversation. (For details, see page 50)
Once you have a dial tone, dial the phone number. The
number will be shown on the LCD along with the call
timer.
Press [OFF] key to hang up your call.
Direct Dialing from Base Unit
Press [;] key and listen for the dial tone. The “Line
indicator” on the base unit will be lit. “TALK” and the
current volume level will appear on the LCD.
Dial the phone number.
Note: If the line is engaged by the handset, “CONFERENCE” will appear on the LCD of
the base unit and the handset and you can join the current conversation. (For details,
see page 50)
TALK VOL-2
HOLD
SERVICE DIR. DIAL V.M.
TALK VOL-2 ;))
HOLD
SERVICE DIR. DIAL V.M.
1234567
0:01:35 VOL-2
;))
HOLD
3WAY
SERVICE DIR. DIAL V.M
123456
7
0:01:35 VOL-5 ;))
HOLD
3WAY
SERVICE DIR. DIAL V.M.
BASIC OPERATION